terrain sdp
Assembly
PVC-U PUSH-FIT ELECTROWELDING SOCKETFUSION BUTT WELDING SOUNDPROOF SOUNDPROOF PLUS

3. Clean any dirt from the faces and nearby areas. Place the buffing tool between the faces and start the machining process.



4. Remove the buffing tool and clean away any remaining shavings.

5. Check that when you join the faces with the pressure device there are no excessive gaps in the joint. The maximum gap must
not exceed 0.5 mm.



6. Check that the heating element is at the right temperature.
(260ºC) + - 5ºC
< Back | Forward>
NUEVA TERRAIN S.L. ::::: POL. IND JUNDIZ C/ PADULETA Nº 2 01015 VITORIA-GASTEIZ - ALAVA (ESPAÑA). ::::: Tel. 945 14 11 88 - Fax. 945 14 33 36